Zum Junction Box-mounted Power Supply for Zum Network Bridge

Model: ZUMMESH-JBOX-PSU

Part #: 6508208

Provides a means for adding a Zum™ network bridge or contact closure output to a Zum lighting system
Zum Mesh peer-to-peer RF communications
Pair and play wireless integration with Zum dimmers, switches, occupancy sensors, vacancy sensors, and daylight sensors
100-277 Volts AC line powered
Flying lead wiring connections

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

A Zum™ junction box-mounted power supply for the Zum network bridge or Zum contact closure output.

The ZUMMESH-JBOX-PSU is an accessory power supply that mounts to a four-inch square junction box and provides a host for a Zum™ Network Bridge (ZUMMESH-NETBRIDGE) or Zum Contact Closure Output (ZUMMESH-CCO). It communicates wirelessly with other Zum Mesh devices in a Zum commercial room lighting system to enable centralized monitoring and management using the network bridge, or to enable integration with an HVAC system using the contact closure output.

The ZUMMESH-JBOX-PSU is similar to a ZUMMESH-JBOX load controller, but without any dimming or switch circuitry onboard.

Provides a means for adding a Zum™ network bridge or contact closure output to a Zum lighting system
Zum Mesh peer-to-peer RF communications
Pair and play wireless integration with Zum dimmers, switches, occupancy sensors, vacancy sensors, and daylight sensors
100-277 Volts AC line powered
Flying lead wiring connections
Knockout mount to a standard 4-inch square junction box
UL® 2043 listed for installation in an environmental air handling space
Meets UL 916 standard for energy management equipment
Meets CEC Title 24 energy efficiency standards
Meets ASHRAE® 90.1 energy efficiency standards
ICC® International energy conservation Code® compliant

UL Rated - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: UL, FCC
AC Voltage (Maximum): 277 Volts
AC Voltage (Minimum): 100 Volts
Depth: 1.32 in
Height: 3.25 in
Width: 4.17 in
Wireless Communications :
•RF Transceiver: 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
•Zum Mesh Range (Typical): 50 ft (15 m) indoor to nearest peer-to-peer mesh network device(s) Subject to site-specific conditions and individual device capabilities
•Zum Net Range (Typical): 150 ft (46 m) indoor to a Zum wireless gateway or nearest mesh network device(s), requires the Zum Network Bridge (model ZUMMESH-NETBRIDGE); Subject to site-specific conditions and individual device capabilities
•Note: A maximum of 32 Zum Mesh wireless devices is permitted per room. Only one Network Bridge is permitted per room.
Controls and Indicators:
•SETUP: (1) Pushbutton and (1) red LED, used for room setup and factory reset
•TEST: (1) Pushbutton and (1) green LED, used for room setup and factory reset
Connections:
•Hot: (1) 14 AWG Class 1 flying lead, black, line power input
•Neutral: (1) 14 AWG Class 1 flying lead, white, neutral
•Expansion Port: Accessory port for Zum Network Bridge or Zum Contact Closure Output (model ZUMMESH-NETBRIDGE or ZUMMESH-CCO)
Construction:
•Housing: Plastic, white, UL 94 5VA flame rated
•Mounting: Mounts to the side of a 4-inch square junction box via a 1/2inch conduit knockout, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space
Active Power: 1 Watt
Product Weight: 0.44 lbs

ZUM-FLOOR-HUB - Single Point Hub Network Controller with Built-in Time Clock

ZUMMESH-5A-LV - 10V Zum Wireless Wall Box Dimmer

ZUMMESH-CCO - Zum Contact Closure Output

ZUMMESH-JBOX-16A-LV-EM - Zum™ Mesh Wireless J-Box Emergency Load Controller, 0-10 V Dimmer, 16 A, 100-277 V

ZUMMESH-NETBRIDGE - Standalone Zum Network Bridge Lighting Control System

ZUMMESH-OL-PHOTOCELL-BATT - Zum Wireless Battery Powered Open Loop Daylight Sensor

ZUMNET-GATEWAY - 2-way RF Wireless Transceiver

Box-mounted Power Supply 659257 kb - Data Sheet

Project List

Box-mounted Power Supply 585478 kb - Other

Project List

Box-mounted Power Supply 340140 kb - Other

Project List

ZUMMESH-JBOX-SIM
Zum J-Box Sensor Integration Module

Products

Zum Junction Box-mounted Power Supply for Zum Network Bridge

Model: ZUMMESH-JBOX-PSU

Part #: 6508208

Solutions

Products

Dallas

New Braunfels